Removal of floor and wall tiles using the TRH technique®

Damp damage is bad enough, but things are worse if there is also damage to floors or tiles when trying to repair leaks. You can avoid this by calling Cibor.

Our expertise

No more difficult search for replacement tiles

Do you no longer have spare tiles? Then you could face a difficult search for replacement tiles because they are often no longer available. Cibor can use its TRH technique® to save you this trouble.

We possess the experience needed to remove both the tiles above the leak and the surrounding tiles without breaking them. The tiles can then be recovered and pipes remain intact. If necessary, we can also replace the tiles and re-point them — always trying to match the original joint colour wherever possible.

Our technique

Removal of ceramic and natural stone floor and wall tiles for re-use

The TRH technique® removes tiles without breaking them, so they can be re-used — while pipes and underfloor heating remain intact.

Without breaking

  • Removing the tiles above the leak and the surrounding tiles without breaking them
  • Tiles are recovered for re-use
  • Pipes remain intact

Replacing and re-pointing

  • If necessary we also replace the tiles for you
  • Re-pointing included
  • Always trying to match the original joint colour wherever possible

Underfloor heating protected

  • Your underfloor heating remains undamaged when tiles are removed
  • Tiles must be ceramic and glued, not laid in a mortar bed
  • The TRH technique® requires a joint width of at least 2 mm

Questions?

No spare tiles for your leak repair?

Applications

When is the TRH technique® the right choice?

The TRH technique® saves you trouble whenever original tiles must be preserved during a leak repair.

No spare tiles

When replacement tiles are no longer available on the market.

Ceramic tiles

Ceramic floor and wall tiles that are glued — the ideal case for the TRH technique®.

Natural stone

Natural stone tiles removed for recovery and re-use.

Joint width from 2 mm

The technique requires a joint width of at least 2 mm.

Mortar bed

Tiles in a mortar bed can usually be removed with limited breaking-related damage.

Underfloor heating

Removal with the underfloor heating remaining undamaged.

Your advantages

Tiles recovered, pipes intact

A misfortune never seems to come alone: damp damage is bad enough, but damage to floors or tiles during a leak repair makes things worse. With the TRH technique® the tiles above the leak and the surrounding tiles are removed without breaking them.

The tiles are recovered, the pipes remain intact and your underfloor heating stays undamaged. If necessary we replace and re-point the tiles, matching the original joint colour wherever possible.

The TRH technique® at a glance:

  • Removal of ceramic and natural stone floor and wall tiles for re-use
  • Underfloor heating remains undamaged
  • Tiles above the leak and surrounding tiles removed without breaking
  • Replacing and re-pointing, matching the original joint colour
  • Tiles recovered — no difficult search for replacements
  • For ceramic glued tiles with a joint width of at least 2 mm
  • Pipes remain intact
  • Tiles in a mortar bed: removal with limited breaking-related damage

Satisfied client

Our clients say

Cibor, my preferred option when removing tiles with breaking them.

The short time frame, a clear and professional approach, and comprehensive knowledge were the most decisive factors.

Need to repair a leak under the kitchen floor, but don't have any spare tiles? Thankfully, Cibor has a solution for removing tiles without breaking them.

Make an appointment

Contact us

Want Cibor to remove your tiles? Then discuss your wishes with one of our experts at 014 570 360. Would you like a quote or approach plan? Send us an e-mail.